Home > Metalworking & Cutting Tools > Chamfer Mills
Sort By:
Page of 2
Dura-Mill 80400: 1/8in. Dia., 1-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , Uncoated Dura-Mill 80400: 1/8in. Dia., 1-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , Uncoated

Orgin: USAIncluded Angle: 60 deg
Diameter: 1/8Single/Double End: DE
OAL: 1-1/2Material: Carbide
# of Flutes: 2Coating: Uncoated

Tiger's Price $27.84
Dura-Mill 80401: 3/16in. Dia., 2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , Uncoated Dura-Mill 80401: 3/16in. Dia., 2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , Uncoated

Orgin: USAIncluded Angle: 60 deg
Diameter: 3/16Single/Double End: DE
OAL: 2Material: Carbide
# of Flutes: 2Coating: Uncoated

Tiger's Price $32.01
Dura-Mill 80402: 1/4in. Dia., 2-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , Uncoated Dura-Mill 80402: 1/4in. Dia., 2-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , Uncoated

Orgin: USAIncluded Angle: 60 deg
Diameter: 1/4Single/Double End: DE
OAL: 2-1/2Material: Carbide
# of Flutes: 2Coating: Uncoated

Tiger's Price $38.99
Dura-Mill 80403: 3/8in. Dia., 2-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , Uncoated Dura-Mill 80403: 3/8in. Dia., 2-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , Uncoated

Orgin: USAIncluded Angle: 60 deg
Diameter: 3/8Single/Double End: DE
OAL: 2-1/2Material: Carbide
# of Flutes: 2Coating: Uncoated

Tiger's Price $50.11
Dura-Mill 80404: 1/2in. Dia., 3in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , Uncoated Dura-Mill 80404: 1/2in. Dia., 3in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , Uncoated

Orgin: USAIncluded Angle: 60 deg
Diameter: 1/2Single/Double End: DE
OAL: 3Material: Carbide
# of Flutes: 2Coating: Uncoated

Tiger's Price $69.61
Dura-Mill 80405: 1/4in. Dia., 2-1/2in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 60 deg , Uncoated Dura-Mill 80405: 1/4in. Dia., 2-1/2in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 60 deg , Uncoated

Orgin: USAIncluded Angle: 60 deg
Diameter: 1/4Single/Double End: DE
OAL: 2-1/2Material: Carbide
# of Flutes: 4Coating: Uncoated

Tiger's Price $38.99
Dura-Mill 80406: 3/8in. Dia., 2-1/2in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 60 deg , Uncoated Dura-Mill 80406: 3/8in. Dia., 2-1/2in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 60 deg , Uncoated

Orgin: USAIncluded Angle: 60 deg
Diameter: 3/8Single/Double End: DE
OAL: 2-1/2Material: Carbide
# of Flutes: 4Coating: Uncoated

Tiger's Price $50.11
Dura-Mill 80407: 1/2in. Dia., 3in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 60 deg , Uncoated Dura-Mill 80407: 1/2in. Dia., 3in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 60 deg , Uncoated

Orgin: USAIncluded Angle: 60 deg
Diameter: 1/2Single/Double End: DE
OAL: 3Material: Carbide
# of Flutes: 4Coating: Uncoated

Tiger's Price $69.61
Dura-Mill 80408: 1/8in. Dia., 1-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , Uncoated Dura-Mill 80408: 1/8in. Dia., 1-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , Uncoated

Orgin: USAIncluded Angle: 90 deg
Diameter: 1/8Single/Double End: DE
OAL: 1-1/2Material: Carbide
# of Flutes: 2Coating: Uncoated

Tiger's Price $27.84
Dura-Mill 80409: 3/16in. Dia., 2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , Uncoated Dura-Mill 80409: 3/16in. Dia., 2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , Uncoated

Orgin: USAIncluded Angle: 90 deg
Diameter: 3/16Single/Double End: DE
OAL: 2Material: Carbide
# of Flutes: 2Coating: Uncoated

Tiger's Price $32.01
Dura-Mill 80410: 1/4in. Dia., 2-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , Uncoated Dura-Mill 80410: 1/4in. Dia., 2-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , Uncoated

Orgin: USAIncluded Angle: 90 deg
Diameter: 1/4Single/Double End: DE
OAL: 2-1/2Material: Carbide
# of Flutes: 2Coating: Uncoated

Tiger's Price $38.99
Dura-Mill 80411: 3/8in. Dia., 2-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , Uncoated Dura-Mill 80411: 3/8in. Dia., 2-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , Uncoated

Orgin: USAIncluded Angle: 90 deg
Diameter: 3/8Single/Double End: DE
OAL: 2-1/2Material: Carbide
# of Flutes: 2Coating: Uncoated

Tiger's Price $50.11
Dura-Mill 80412: 1/2in. Dia., 3in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , Uncoated Dura-Mill 80412: 1/2in. Dia., 3in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , Uncoated

Orgin: USAIncluded Angle: 90 deg
Diameter: 1/2Single/Double End: DE
OAL: 3Material: Carbide
# of Flutes: 2Coating: Uncoated

Tiger's Price $69.61
Dura-Mill 80413: 1/4in. Dia., 2-1/2in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 90 deg , Uncoated Dura-Mill 80413: 1/4in. Dia., 2-1/2in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 90 deg , Uncoated

Orgin: USAIncluded Angle: 90 deg
Diameter: 1/4Single/Double End: DE
OAL: 2-1/2Material: Carbide
# of Flutes: 4Coating: Uncoated

Tiger's Price $38.99
Dura-Mill 80414: 3/8in. Dia., 2-1/2in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 90 deg , Uncoated Dura-Mill 80414: 3/8in. Dia., 2-1/2in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 90 deg , Uncoated

Orgin: USAIncluded Angle: 90 deg
Diameter: 3/8Single/Double End: DE
OAL: 2-1/2Material: Carbide
# of Flutes: 4Coating: Uncoated

Tiger's Price $50.11
Dura-Mill 80415: 1/2in. Dia., 3in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 90 deg , Uncoated Dura-Mill 80415: 1/2in. Dia., 3in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 90 deg , Uncoated

Orgin: USAIncluded Angle: 90 deg
Diameter: 1/2Single/Double End: DE
OAL: 3Material: Carbide
# of Flutes: 4Coating: Uncoated

Tiger's Price $69.61
Dura-Mill 91400: 1/8in. Dia., 1-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , TiCN Dura-Mill 91400: 1/8in. Dia., 1-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , TiCN

Orgin: USAIncluded Angle: 60 deg
Diameter: 1/8Single/Double End: DE
OAL: 1-1/2Material: Carbide
# of Flutes: 2Coating: TiCN

Tiger's Price $28.46
Dura-Mill 91401: 3/16in. Dia., 2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , TiCN Dura-Mill 91401: 3/16in. Dia., 2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , TiCN

Orgin: USAIncluded Angle: 60 deg
Diameter: 3/16Single/Double End: DE
OAL: 2Material: Carbide
# of Flutes: 2Coating: TiCN

Tiger's Price $32.76
Dura-Mill 91402: 1/4in. Dia., 2-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , TiCN Dura-Mill 91402: 1/4in. Dia., 2-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , TiCN

Orgin: USAIncluded Angle: 60 deg
Diameter: 1/4Single/Double End: DE
OAL: 2-1/2Material: Carbide
# of Flutes: 2Coating: TiCN

Tiger's Price $40.14
Dura-Mill 91403: 3/8in. Dia., 2-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , TiCN Dura-Mill 91403: 3/8in. Dia., 2-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , TiCN

Orgin: USAIncluded Angle: 60 deg
Diameter: 3/8Single/Double End: DE
OAL: 2-1/2Material: Carbide
# of Flutes: 2Coating: TiCN

Tiger's Price $52.30
Dura-Mill 91404: 1/2in. Dia., 3in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , TiCN Dura-Mill 91404: 1/2in. Dia., 3in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 60 deg , TiCN

Orgin: USAIncluded Angle: 60 deg
Diameter: 1/2Single/Double End: DE
OAL: 3Material: Carbide
# of Flutes: 2Coating: TiCN

Tiger's Price $72.94
Dura-Mill 91405: 1/4in. Dia., 2-1/2in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 60 deg , TiCN Dura-Mill 91405: 1/4in. Dia., 2-1/2in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 60 deg , TiCN

Orgin: USAIncluded Angle: 60 deg
Diameter: 1/4Single/Double End: DE
OAL: 2-1/2Material: Carbide
# of Flutes: 4Coating: TiCN

Tiger's Price $40.13
Dura-Mill 91406: 3/8in. Dia., 2-1/2in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 60 deg , TiCN Dura-Mill 91406: 3/8in. Dia., 2-1/2in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 60 deg , TiCN

Orgin: USAIncluded Angle: 60 deg
Diameter: 3/8Single/Double End: DE
OAL: 2-1/2Material: Carbide
# of Flutes: 4Coating: TiCN

Tiger's Price $52.30
Dura-Mill 91407: 1/2in. Dia., 3in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 60 deg , TiCN Dura-Mill 91407: 1/2in. Dia., 3in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 60 deg , TiCN

Orgin: USAIncluded Angle: 60 deg
Diameter: 1/2Single/Double End: DE
OAL: 3Material: Carbide
# of Flutes: 4Coating: TiCN

Tiger's Price $72.94
Dura-Mill 91408: 1/8in. Dia., 1-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , TiCN Dura-Mill 91408: 1/8in. Dia., 1-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , TiCN

Orgin: USAIncluded Angle: 90 deg
Diameter: 1/8Single/Double End: DE
OAL: 1-1/2Material: Carbide
# of Flutes: 2Coating: TiCN

Tiger's Price $28.46
Dura-Mill 91409: 3/16in. Dia., 2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , TiCN Dura-Mill 91409: 3/16in. Dia., 2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , TiCN

Orgin: USAIncluded Angle: 90 deg
Diameter: 3/16Single/Double End: DE
OAL: 2Material: Carbide
# of Flutes: 2Coating: TiCN

Tiger's Price $32.76
Dura-Mill 91410: 1/4in. Dia., 2-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , TiCN Dura-Mill 91410: 1/4in. Dia., 2-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , TiCN

Orgin: USAIncluded Angle: 90 deg
Diameter: 1/4Single/Double End: DE
OAL: 2-1/2Material: Carbide
# of Flutes: 2Coating: TiCN

Tiger's Price $40.13
Dura-Mill 91411: 3/8in. Dia., 2-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , TiCN Dura-Mill 91411: 3/8in. Dia., 2-1/2in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , TiCN

Orgin: USAIncluded Angle: 90 deg
Diameter: 3/8Single/Double End: DE
OAL: 2-1/2Material: Carbide
# of Flutes: 2Coating: TiCN

Tiger's Price $52.30
Dura-Mill 91412: 1/2in. Dia., 3in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , TiCN Dura-Mill 91412: 1/2in. Dia., 3in. Overall Length, 2-Flute, Carbide Chamfer Mill- DE, 90 deg , TiCN

Orgin: USAIncluded Angle: 90 deg
Diameter: 1/2Single/Double End: DE
OAL: 3Material: Carbide
# of Flutes: 2Coating: TiCN

Tiger's Price $72.94
Dura-Mill 91413: 1/4in. Dia., 2-1/2in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 90 deg , TiCN Dura-Mill 91413: 1/4in. Dia., 2-1/2in. Overall Length, 4-Flute, Carbide Chamfer Mill- DE, 90 deg , TiCN

Orgin: USAIncluded Angle: 90 deg
Diameter: 1/4Single/Double End: DE
OAL: 2-1/2Material: Carbide
# of Flutes: 4Coating: TiCN

Tiger's Price $40.13
   
 

Solid Carbide Chamfer Mills

These Solid Carbide Chamfer Mills are avialable in both Single End and Double End Designs. All of our Carbide Chamfer Mills are made in America, USA from premium C2 Grade Carbide with 10% cobalt. These Chamfer Mills are offered with included angles of 60 deg, 82 deg, 90 deg and 100 deg. Tiger Tool Supply offers same day shipping on order before 2:00pm (cst). Buy Now!